| Synthetic High Temperature Chain Oil 440A |
| Main Specifications |
|
| Item |
Quality indicators 440A |
| Kinematic viscosity at 100℃ mm2/S |
25 |
| Viscosity index |
150 |
| Acid Value（mgKOH/g） |
0.1 |
| Flash Point ℃ |
250 |
| The main performance |
| This product has a high viscosity index, and good viscosity temperatureproperties, heat setti |
| ng machine can meet the requirements of requirements of high temperature lubrication,Can |
| guarantee thatat room temperature, the start-up; has a high flash point, heat setting machine |
| can guarantee security; with the thermal oxidation decomposes under the conditions, cracki |
| ng intothe performanc of small molecules that stereotypes carbon chains and very fe tracks, |
| and Qing Jiao easy; This product is not easy times caused by greasecloth, generally run abo |
| ut one year. |
|
|
| Purpose |
|
| This product is suitable for the domestic textile industry,M751M771, ZH921-and renewed, |
| sub-alumina, power root,Heat setting machine,and the introduction of rail SST resin finishi |
| ngmachines, chain lubrication. Maximum temperature: 230℃ |
|
| Caution |
|
| 1.In the storage and use, should be to prevent impurities and water mix. |
| 2.Do not mix with other oil products. |
| 3.This product has some evaporation loss at high temperatures, the use of stereotypes to pay |
| special attention to open theair duct,Accident. |
|
|
|
| Packing |
|
4L、18L、200L
| 440A合成高温链条油 |
|
|
| 主要技术指标 |
|
| 项 目 |
440A质量指标 |
| 100℃运动粘度，m㎡/s 不小于 |
25 |
| 粘度指数 不小于 |
150 |
| 中和值,mgKOH/g 不小于 |
0.1 |
| 闪点(开口),℃ 不小于 |
250 |
| |
|
| 主要性能 |
|
| 本产品具有粘度指数高、粘温性能好的特点，既能满足热定型机高温润滑的要求， |
| 又能保证在常温下的启动；具有高的闪点，可保证热定型机安全工作；具有在热氧化条 |
| 件下发生分解反应，裂解成小分子物质的性能，使定型机链条及轨道积碳极少，且清焦 |
| 容易；本产品不易造成油渍次布，一般可运行一年左右。 |
|
|
| 用 途 |
|
| 本产品适用于纺织行业的国产M751、M771、ZH921型和日新、亚矾、力根、美光等热定 |
| 型机和引进的SST树脂整理机道轨、链条的润滑。最高使用温度：230℃。 |
|
|
| 使用注意事项 |
|
| 1. 在贮运和使用过程中，应防止杂质和水份混入。 |
| 2. 请勿与其它油品混用。 |
| 3. 本产品在高温下有一定蒸发损失，使用时要特别注意打开定型机的风道，以免发生 |
| 事故。 |
|
|
| 包装规格 |
| ◆4L、18L、200L | |
